Tag Archives: epoxy pool paint

How to give a new life for your pool by epoxy swimming pool paint?

Unlike maintaining an ordinary floor, it is tough to maintain the floor of your swimming pool. Finding a perfect solution to make you flooring great in looks as well as weathering away due to constant contact with water is indeed a challenge but not entirely impossible. You could confidently say so because you can give your pool that is looking old and ill-maintained an all-new look and maintain it that way for years to come using the epoxy pool paint. It is quite cheaper than revamping the pool floor with pool tiles and much easier to maintain it too.

Painted pools- problems you may encounter

The problems you face with painted pool includes

Fading or staining – This is a natural process that happens over time. You cannot prevent even the brightest paint from looking dull as time passes. Acid wash might be a remedy that may help you clean the dirt and chalking, but it would dull the paint too.

Chalking – Paint surfaces have a tendency to break down leaving a white residue that gives the water a hazy look and it is called chalking. To prevent this the alkalinity and the PH must be in balance. When alkalinity, as well as the ph level, are low it leads to chalking or paint deterioration.

Blisters and bubbles- This does not happen with use, but it is a result of improper preparation for pool painting. If there had been moisture content in the in the flooring when it was being painted it would result in blisters. The application temperature may cause the occurrence of blisters.

Epoxy coating

You might know that the swimming pools come with different finishes. You may have the floor of the pool tiled, or you could leave it with a painted concrete flooring, or it could be of fiber. But maintaining a painted concrete flooring is quite tricky and using tiles could be an expensive affair, and it still needs to be maintained too. When you are thinking of revamping your fading, chalking and worn-out pool flooring and giving it a new and radiant look that lasts long even up to 20 years, you have to consider the epoxy swimming pool paint.

What are the features of the Epoxy paint?

The Epoxy is a thermosetting polymer that is made of two parts the hardener and the resins. The epoxy pool paint is a special paint that adheres to the surface of the pool and creates a coating that makes the floor resistant to chemicals, stains, and abrasion. They are specially formulated to remain fresh and new even in submerged conditions. It is the cheapest and perhaps the long-lasting solution for your swimming pool. It gives the pool a high-gloss finish. The most endearing features of the epoxy coating include

1. Bond strength

2. Protection from UV rays

3. Exceptional penetration

4. Chalk resistance

5. Protection from algae infestation

6. Chemical resistant

7. Glossy finish

8. Cost-effective

9. Suitable for resurfacing and repairing

10. The shorter time required for putting the pool to use which is a maximum of 5 days.

Where can you use an Epoxy coating ?

The epoxy is a perfect solution for pool painting of all types and sizes which includes

1. Spas

2. Decorative ponds

3. Indoor pool

4. Outdoor pools

It is an ideal solution for keeping the pool fresh and ensure its longevity for

1. Resorts

2. Golf courses

3. Recreation areas

4. Parks

5. Apartment complexes

6. Houses

that features a swimming pool for the first time or those thinking of swimming pool repair.

Why should you Use Epoxy paints?

Life Expectancy

There are many Epoxy paints in the market. There are high-build epoxy paints that offer a life expectancy of up to 20 years while the minimum life you can expect with the epoxy coating is about eight years. The coating is an ideal for concrete, gunite, fiberglass or plaster that feature a tile-like finish. With the glossy finish and qualities that outlast other chlorinated rubber coatings which render it a “One Time Investment” that guarantees all-new look throughout its life.

The color choice

There are a number of eye-catching epoxy pool paint colors to choose from. It includesepoxy paint color

1. White 

2. Light Blue

3. Medium blue

4. Coral Blue

5. Night Blue

6. Aqua

7. Royal blue

8. Charcoal

9. Black.

However, the color choices are dependent on the brand of epoxy pain you choose to use for your pool. If you select the best brands with silicone and UV stabilizers, you can be assured of color retention and protection from UV rays and chlorine for a long time.

Impervious finish

The Epoxy Coating does not only lend a great glossy appearance, but it also makes the pool flooring protection from deterioration due to chemicals, abrasion, algae, pool cleaning machines, mineral oils, fresh or salt water and others. This is achieved by the impervious finish that the epoxy coating provides with pool renovation.

Fill qualities

The feature that makes an epoxy pool paint cost-effective apart from the life expectancy is its fill qualities. The Epoxy paint that is required to coat a properly prepared surface is comparatively lesser than any other type of paint coating. You also get the advantage of getting a smooth and hard finish even if the pool surface is imperfect which means additional savings on plastering costs.

Shorter waiting time.

The Epoxy paint drys fast and makes it possible for you to use the pool as early as possible. In general, the first coating of the paint takes about 6-8 hours to dry at 75 degrees Fahrenheit. This time reduces drastically in case of higher temperature and lower humidity. This could be followed by an optional second coat to be applied within 16-72 hours. Now the pool is ready. You need to let it cure for 5 days after which you can fill it water. In case there is rain, it is important to add one day more to each day of rain before you fill water in the pool after the swimming pool repair.

Applying Epoxy Paint

The process of application consists of three steps

1. Estimating the paint requirements

2. Surface preparation

3. Mixing and application

The paint requirements

There might be slight differences in the estimation of paint required depending on the quality of the epoxy paint, the general rule is to estimate coverage using the following formula Length of the pool Xwidth of the pool X1.7 = square footage. The square footage should be multiplied by 2 (if you want two coats) and then divided by 500 to get the epoxy requirements. You have epoxy kits starting from 2 gallons. The requirement calculation will give you a fair idea of the number of kits you require for pool renovation.

Surface preparation

1. Use water blasting to remove paint, dirt, grease, and oil from the surface of the pool

2. Use Trisodium Phosphate (TSP) wash to scrub the surface

3. Use Muriatic acid solution (15-20%) to etch the surface

4. Rinse thoroughly holy with TSP and fresh water.

5. Dry the pool after pool painting

Mixing and application

Follow the instructions given for the mixing of the epoxy paint. Mix only enough epoxy that you can apply within 1 or 2 hours. Note that high temperatures would reduce the pot life of the paint. The paint can then be applied using the brush and roller or sprayed. Rolling is however recommended for the best finish. It dries to give a glossy, finish. You can add pumice stone, marble dust or sand to provide it with an anti-skid finish.

The DIY project

The applying epoxy coating is a simple DIY project if only you know how to go about it. The epoxy is usually sold in the form of an epoxy kit, and you need to buy the number of epoxy swimming pool painting kits you required based on the size and area of the pool as well as the number of coats which you wish to apply. The recommended, as well as the right number for a proper finish, is generally 2.

Differentiating an epoxy from other paints

This is essential to determine the type of paint that has been already applied in the pool. If the paint type is not known to you, you can find it out by sending a sample to a paint manufacturer or by testing it.

The test

1. Immerse one-inch paint chip in denatured alcohol, the paint is a water-based acrylic, if the chip dissolves

2. Immerse a chip in 75% mineral spirits and xylol 25%leave it for 30 secs. Now rub the chip between your fingers, if it dissolves, you may conclude that the paint is Synthetic rubber base coating

3. Immerse a chip in 100%xylol. If the chip dissolves, then it is a chlorinated rubber.

4. If it does not dissolve in 100%Xylol, it is an epoxy pool paint.

Factors to consider while using Epoxy

5. It is best to apply epoxy paint at surface temperatures of 50-90 degree Fahrenheit to get the best coverage rate.

6. While the drying period is five days in case there is no rain, it is better to have a waiting period of 10-12 days in case of indoor pools

7. When you are recoating, do it within 72 hours. If you are recoating it after 72 hours, you should do it by sanding the first coat.

8. No primer is required for epoxy paints

9. The pot life of mixed epoxy pool paint is only three hours, and the shelf life of the epoxy mix is only a year. Take care while mixing and buying.

10. Get ready to give your pool an all-new fresh look that lasts long to consider it an one- time investment.

What are Fiberglass Swimming Pools benefits compare to Concrete or Vinyl liner Pools

Fiberglass swimming pools come in pre-assembled forms complete with stairs, ledges and in-built ladders. They are also available in many sizes and shapes. Fiberglass swimming pools are very popular as both domestic as well as commercial swimming pools. A fiberglass swimming pool is a little more expensive than a concrete pool or vinyl liner pool but it has several advantages and requires much less maintenance which makes it a good investment.

Advantages of fiberglass swimming pools

Some of the advantages of fiberglass swimming pools over concrete and vinyl liner pools have been listed here.

1. Fiberglass swimming pool requires less maintenance. This is because the inner surface finishing of the pool called gel coat is nonporous in nature and does not allow water penetration of the shell of the swimming pool. The gel coat also prevents algae growth and reduces the amount of purifying chemicals needed to be added to the pool water. Not more than half hours a week of maintenance work is required for fiberglass swimming pools.

2. Fiberglass swimming pools are built-off site and not at the location. This ensures that they can be installed much more swiftly as compared to concrete or vinyl liner pools and are ready to be used within 3-4 weeks.

3. The fiberglass shell does not require resurfacing or replacement of vinyl liner as is the case with concrete and vinyl liner swimming pools. Thus, the cost of upkeep of the fiberglass shell is negligible.

4. The gel coat of a fiberglass swimming pool is smooth and non-abrasive. Thus, the inner surface of the swimming pool is not harsh on the bodies of the swimmers.

5. Ladders, steps and seating are in-built into the shell of a fiberglass swimming pool. Thus, there is no additional cost to install them as is the case with concrete and vinyl liner swimming pools.

Reasons for water penetration in a fiberglass swimming pool

Even though there are many benefits associated with fiberglass swimming pools, problems can arise when the gel coat wears out or is damaged after a period of time which is usually 10-25 years. The gel coat can suffer algae growth, develop osmosis spots, develop black spots and other problems which compromise its integrity. In such a state, the gel coat is no longer able to protect the fiberglass shell of the pool from water invasion.

Results of water invasion

The fiberglass shell is made of strands glass fibres reinforced by resin. Water invading the shell through the damaged and porous gel coat causes rotting of the fiberglass fibers. This ultimately results in the fiberglass shell losing its structural integrity and eventually collapsing. Therefore, waterproofing becomes critical in case of a compromised gel coat in a fiberglass swimming pool.

How to waterproof the gel coat?

Epotec is a high-grade epoxy pool paint which has been specifically designed for swimming pool waterproofing. It is no ordinary epoxy paint but a pool grade epoxy paint which can remain immersed in water for years on end. Epotec forms a hard wearing coating over the gel coat which prevents both liquid and gaseous water molecules from gaining entry into the shell of the fiberglass swimming pool. The epotec coating remains unaffected by UV rays of the sun, purifying chemicals such as chlorine, body fats, body lotions, etc.

Prior to upgrading the gel coat, it is necessary to go for fiberglass swimming pool repair. The worn out or damaged gel coat must be repaired. Re-fiberglassing may also be required for fiberglass pool repair if the glass fibers have started to rot due to water invasion. Necessary repairs to the structure may also be required to be carried out.

Surface preparation is also essential before applying epotec. Un-reacted styrene may be present on the surface. It needs to be eliminated to avoid reaction with the epoxy coating. Epotec is applied in two coats. The curing time is 5-7 days. The result is a hard wearing coat which lasts 7-14 years.

Beneficial features of epotec

Some of the beneficial features of epotec pool paint which makes it highly suitable for fiberglass as well as concrete swimming pool waterproofing have been mentioned here.

1. Epotec is a 100% solid pool paint. This means that the paint has no thinners or solvents in its chemical
composition. As a result, the paint forms a solid coating which does not shrink as it cures. A conventional
paint has just 30-40% solids.

2. Epotec is chemically inert. Therefore, the coating cannot be removed by chemicals. The chemicals present in the pool water also have no effect on the coating. The coating can only be removed by mechanical wear and tear.

3. The thickness of the coating is same as the applied thickness since there is no shrinkage after curing. This is the reason one should make the coating as much thick as possible.

4. The life of the coating depends upon the thickness of the coating. The coating usually lasts for 7-14 years without the need for recoating.

5. Epotec comes in the form of 2-pack paint. It is easy to apply using brushes or rollers. You can apply it yourself or hire a professional for the job.

6. Epotec comes in a multitude of colours such as slate grey, chamois, opal, whisper grey, royal blue, sky blue, white, etc.


Long term water protection of swimming pools by epotec epoxy pool paint

Swimming pools in homes or commercial locations need regular maintenance to avoid costly repairs. The level of usage and the quality of water are the main determinants of the frequency of maintenance works required by the pool. Waterproofing is one of the main concerns for pool owners. Pool water and the purifying chemicals present in it can cause serious damage to the swimming pool in the absence of waterproofing. Epotec epoxy pool paint is a waterproofing paint which eliminates the need to worry about waterproofing for long periods of time. This is because epotec coating lasts for a minimum of 7 years and a maximum of 14 years before the need for recoating. Epotec coating continues to provide full proof water protection to the inner walls of the swimming pool irrespective of the chemicals and other materials present in the pool water.

Used in diverse swimming pools

Epotec paint is used for waterproofing concrete and fiberglass swimming pools besides many other varieties of swimming pools such as fiberglass lined concrete swimming pools and pools with marbesheen or peeblecrete finishing.

  • Epotec is widely used as a concrete swimming pool paint Sydney. The function of the waterproof paint coating in a concrete swimming pool is to prevent pool water from coming in contact with the surface of the concrete inner walls of the pool. If the walls are not waterproofed, the pool water reaches the steel reinforcements present in the shell of the pool and causes corrosion. Water penetration can also cause concrete cancer. Thus, epotec concrete swimming pool coating Sydney prevents structural collapse of the pool.


  • Epotec can also be used a waterproof epoxy paint for fiberglass swimming pools. The gel coat which is the inner finishing of a fiberglass swimming pool can be resurfaced with epotec paint coating when it fails to prevent water invasion into the fiberglass shell of the pool. It is imperative to go for fiberglass pool repair to rectify the damaged gel coat and other parts of the pool before applying epotec. Algae growth, osmosis spots, black spots, etc. are the common signs of a damaged gel coat. Proper resurfacing is necessary for applying epotec. Professional fiberglass contractors should be hired for resurfacing.


  • Epotec can be used to protect the concrete in fiberglass lined swimming pools when the fiberglass sections become weak or detach from the surface. Similiarly, epotec can also be used for upgrading marblesheen and pebblecrete swimming pools when these finishings are damaged or worn out.


Solid coating

Epotec forms a hard wearing barrier over the surface. The presence of 100% solids in its composition means that the coating does not shrink since there are no solvents to evaporate as the paint cures.

Long life

Even though the coating lasts 7-14 years, the time period is different for domestic and commercial swimming pools. For domestic swimming pools, the life of the coating is usually 12 years while for commercial swimming pools, the minimum life span is 5 years.

Diversity of colours

Epotec epoxy paint colours are available in various shades such as black, grey, blue, opal, chamois, white, etc.



Epotec is easy to mix and apply using brushes and rollers. Proper surface preparation must be done before application. The thickness of the coating must be uniform.

Ultimate pool waterproofing with epotec epoxy pool paint

When it comes to swimming pool waterproofing, you need to implement only the best solutions. This is because imperfect waterproofing can lead to significant damage to your swimming pool resulting in highly exorbitant repair bills. In many cases, water damage can be so severe that the whole pool needs to be replaced. Waterproof pool paints are being widely used by pool owners for all kinds of pools. However, not all pool paints provide efficient waterproofing. The ultimate waterproofing paint which provides perfect and long term protection against pool water is epotec epoxy pool paint. Epotec has been designed specifically for swimming pool waterproofing and is capable of water immersion for long periods of time.

Reasons for its high potency

  1. Epotec epoxy paint remains unaffected by chemicals such as chlorine added to pool water for purification since it is chemically inert. The coating is also not affected by body lotions, body fats, dirt, etc. Therefore, short of mechanical damage, there is no way in which the coating can disintegrate in the pool.


  1. Epotec paint forms a high build coating. There is no shrinkage of the coating which enables it to retain its original thickness. The reason for this characteristic is the zero solvent content of the paint. Since the solvent content is zero, there is no evaporation. What we get is a 100% solid coating.


  1. Epotec coating can last for 7-14 years without the need for recoating. The life of the coating depends upon the thickness. More the thickness of the coating more is the life span. Thus, epotec guarantees water protection for year on end.

Types of swimming pools covered

Epotec paint can be used for waterproofing both concrete and fiberglass swimming pools along with other varieties of swimming pools.

Concrete- Epotec is a highly effective concrete swimming pool paint Sydney.  Waterproofing is crucial in a concrete swimming pool because pool water leaking through the inner walls can reach the steel reinforcements used in the pool resulting in damage. Epotec concrete swimming pool coating Sydney protects the steel reinforcements against water by forming a strong barrier over the concrete surface. This barrier cannot be penetrated by pool water. Epotec also provides protection against hydrostatic pressure which develops when water is directly in contact with concrete.

Fiberglass- Fiberglass strands making up the structure of a fiberglass swimming pool starts to rot when pool water starts reaching them. This can happen when the inner finish of the pool called gel coat is damaged or worn out. Epotec epoxy paint for fiberglass can be used as a waterproof finish in such cases instead of gel coat. Upgrading of the gel coat with epotec can be done only after the completion of fiberglass pool repair. Proper repairs to the gel coat such as elimination of algae growth and osmosis spots must be undertaken before resurfacing with epotec.

Wide range of colours

Epotec epoxy paint colours come in a plethora of shades. Some of them are as follows.

  • Blue( Sky blue, Dark blue, Mid blue and Royal blue)
  • Grey( Whisper and Slate grey)
  • Aqua
  • Black
  • Opal




Epotec paint is a blend of superior waterproofing function, high durability and good aesthetics. Thus, it is the ideal paint for swimming pools.

Features of epotec epoxy pool paint designed for swimming pools

Tiles and rendered finish used for swimming pool waterproofing have many disadvantages. Broken tiles are difficult to replace and leakages appearing in tiles also cannot be plugged easily. It is also difficult to clean and maintain tiled finishing. Rendered finish has a rough surface and can scratch the skins of swimmers. Thus, in order to get the best waterproofing without any of the associated disadvantages, epotec epoxy pool paint is being widely used by people. Epotec paint coating provides a hard wearing but smooth surface which does not scratch the skin. It is also very easy to clean and highly durable. The paint comes in various colours and is aesthetically appealing.

Epotec for concrete swimming pools

Epotec paint is an efficient and convenient waterproofing option for concrete swimming pools. Concrete swimming pools feature steel reinforcements in their structures. In the absence of waterproofing, the inner walls of the swimming pool allow water to penetrate their concrete surface and reach the steel reinforcements. Consequently, the steel reinforcements get corroded leading to collapse of the structure of the swimming pool. Epotec concrete swimming pool coating Sydney prevents water from coming in contact with the concrete mass and invading the steel reinforcements. Epotec concrete swimming pool paint Sydney is both water and vapour proof meaning it withstands both liquid and gaseous water molecules.

Concrete swimming pools with marblesheen and pebblecrete finishing can also be waterproofed using epotec paint. Marblesheen is made using crushed marble chips and white cement while peeblecrete is a mixture of pebbles and cement. Epotec is useful when these finishings are no longer able to provide waterproofing either due to damage or general wear and tear.

Damaged or worn out fiberglass lining in fiberglass lined concrete swimming pools can also be replaced with epotec pool paint for waterproofing.

Epotec for fiberglass swimming pools

Fiberglass swimming pools are widely used in both domestic households as well as commercial establishments. Fiberglass swimming pools are made using fiberglass strands and resin. The shell of a fiberglass swimming pool is a semi transparent structure. The inner surface of the pool has a finish called gel coat. Gel coat is visible underneath the pool and its function is to prevent pool water from reaching the fiberglass shell of the pool. Epotec epoxy paint for fiberglass can be used to upgrade the waterproofing ability of the pool when the gel coat wears out or suffers damage. Osmosis spots, algae growth, black spots and general wear and tear compromise the waterproofing function of the gel coat. Upgrading with epotec prevents water from getting into the fiberglass structure of the pool and causing damage.

However, before resurfacing with epotec, it is necessary to go for fiberglass pool repair. The gel coat must be repaired before applying epotec. The pool may also require other kinds of repairs as determined by the fiberglass pool contractor.

Colours available

There are many epotec epoxy paint colours for the customers to choose from for their pools. The various colours include chamois, pale gade, gardenia, glacier white, slate grey, etc.




Epotec pool paint is a simple yet effective way of pool waterproofing and avoiding costly repairs necessitated by water damage.