Tag Archives: concrete swimming pool paint Nsw

Epoxy concrete swimming pool coating Sydney for waterproofing

The importance of waterproofing the inner walls of swimming pools is emphasized by swimming pool experts all over the world. The advent of new technology has enabled the creation of waterproof pool paints for swimming pool waterproofing. The waterproof pool paints can be used instead of conventional waterproof finishing such as rendered finishes or tiles. Epotec epoxy paint Sydney is a superior pool paint as compared to other types of waterproof pool paints available in the market. Epotec chemically attaches to surface, withstands chemicals and UV rays of the sun, resists cracking, easy to clean, long lasting, resists staining and has a smooth surface which does not scratch the skins of the swimmers. All these characteristics and more make epotec the ideal choice for swimming pool waterproofing.

Method of application

The surface needs to be cleaned using detergent to remove dirt, oil, fats and other contaminants. Acid must not be used for cleaning the surface. Defects on the surface such as worn out areas, cracked areas, etc. must be repaired. Moisture must also be removed from the surface prior to application of epotec coating.

Roller or brush can be used for applying epotec. The area covered per application should be 1-2 square metres. The thickness of the coating determines its life span. Therefore, the coating should be sufficiently thick and every area must have the same thickness of coating to prevent uneven life span of the coating in different areas.

The application of the coatings must commence in the morning and finish by 1 pm in summers and 12 pm in winters. This is essential to enable the coating to cure before evening when dew sets in. The time required for a coat to cure is 12-24 hours. Curing time may be increased in winters. The pool can be filled with water and chemicals can be added only after 5 days from coating in summers and 7 days in winters.

The epotec coating must also be protected against rain during the curing period. If rain falls on the epotec coated surface during this period, a whitish spot appears on it. The white spot does not affect the waterproofing function of epotec or the curing process even though it spoils the aesthetics. The whitish spot disappears within 1-2 months or it can be sanded off.

Mode of waterproofing

Epotec is a waterproof concrete swimming pool coating Sydney. The hard coating forms a shield over the concrete surface of the inner walls of a concrete swimming pool. Both liquid and gaseous water molecules are prevented from reaching the steel reinforcements of the concrete swimming pool by the epotec coating. Thus, the structure of the concrete swimming pool remains intact. This is the reason why epotec should be used for waterproofing at the time of concrete swimming pool construction Sydney or concrete swimming pool repair Sydney. Epotec epoxy paint for concrete Sydney has similar actions in fiberglass lined concrete swimming pools and marblesheen and pebblecrete finished concrete swimming pools.

Waterproofing fiberglass swimming pools also come under epoxy paint uses Sydney.

 

 

Apart from functional point of view, epotec also scores well in terms of aesthetics because it is available in a range of colours and textures.

All about epotec pool paint for swimming pools

Epoxy paint is widely used in workshops, paint shops, concrete floors, etc. However, the general epoxy paint cannot be used in swimming pools for waterproofing. The epotec pool paint is a special pool grade epoxy paint which has been specifically manufactured to provide waterproofing to inner surfaces of swimming pools. The epotec epoxy pool paint does not degrade inside water nor is affected by chemicals. It provides a smooth surface which effectively prevents water penetration. Epotec is much superior as compared to chlorinated rubber paint and rendered finishes.

What kinds of swimming pools are suitable?

Fiberglass and concrete swimming pools are ubiquitous in both domestic households and other establishments. Therefore, epotec epoxy paint has been designed for waterproofing both the types of swimming pools.

Epotec is the best waterproofing choice for concrete swimming pool construction Sydney. The steel reinforcements of a concrete swimming pool must be protected from water and finishing the inner surface of the pool with epotec pool paint is recommended to achieve it. Epotec coating does not allow water in either liquid form or vapour form to pass through it. Thus, the steel reinforcements never come in contact with water. Epotec concrete swimming pool paint Sydney is also suitable for concrete swimming pools lined with fiberglass or finished using pebblecrete or marblesheen.

Epotec can also be used for fiberglass pool resurfacing if the gel coat suffers from osmosis spots, algae growth, black spots and other kinds of damages. Gel coat is the inner surface of a fiberglass swimming pool and upgrading a damaged gel coat with epotec paint restores its waterproofing ability.

Application

Mixing epotec is the first step before application. Epotec pack consists of two cans. The hardener is contained in a 500ml can while the resin is present in a 4 litre can. The hardener must be put in the can containing resin. Thereafter, both need to be mixed properly using a plastic hand mixer. The mixing process does not require more than 2-3 minutes. The mixture then needs to be allowed to stand for 10 minutes.

The paint can be applied using rollers or brushes. The paint must be applied evenly because the thickness of the coating determines its life. Professional workmen are available for the task.

Prior to application, the following things must be ensured.

  • Absolutely clean surface with no trace of dirt, oil, fat or other contaminants.
  • Smooth surface devoid of worn out or rough areas.
  • The surface must not be moist.

The surface must be cleaned with water or detergent prior to application. Acid must never be used for cleaning the surface.

Other information

The epotec epoxy paint prices Sydney depends upon the type of the swimming pool and the finishing along with dimensions of the swimming pool such as length, width, depth and volume. If you opt for professional workmen for application then you need to spend more as compared to DIY applications.

There are many types of epotec epoxy paint colours Sydney such as sky blue, tasman blue, opal, glacier white, chamois, aqua and many more.

 

 

Epotec epoxy paint is a blend of efficient waterproofing, durability and attractive colours and designs. Thus, it is an excellent option for pool waterproofing.