Non Slip Finish

To gain a non-slip finish, particularity on ramps and steps, apply washed and graded beach sand into a wet first coat to obliterate the underlying epoxy paint colour. Allow curing overnight, sweep off loose material and apply a second coat to secure the sand and smooth off the surfaces somewhat.

Use a sieve or container to shake out the sand. Don’t try to make a lessor more uniform coverage. Total blinding is needed.

By total coverage (blinding) of sand a more uniform non slip will be achieved. Allow to cure overnight.

Next day, sweep off all loose sand.

Apply by roller or brush an ample coat of epoxy paint to reduce the profile to something comfortable to walk on.
 

Vacuum up loose sand. Then apply one more coat.
 

          Non slip finish on a ramp.