Your "Bondi" mid blue Epotec epoxy Poolpaint arrived quickly and OK for our 11mx 4m x1.5m Fibreglass Pool which is about 25 years old and has not been touched but was in pretty good condition. We started emptying our Fibreglass Pool just using Pool Pump to waste After 2 days of saning and a couple of minor fibreglass and bog repairs, and NO RAIN my wife and I got into the painting with Epotec. It was 15 deg at 8am when we started and did not go above 25 to 30 deg for the 3 days we took. The first coat I did the top and around the leaf gutter and kids ledge half way down walls, with a 120 mm lambswool roller which worked very well, and my wife did the sides and bottom with a 250 mm lambswool roller. The first coat took more time and it took the 2 of us until 2pm to finish with 1/2 hour for lunch.( 6 hours) We changed rollers and cleaned roller frame (used same frames for all coats) for each can of paint and it took 3 cans with each can having 50ml of thinners added prior to the hardener. Same procedure each day with the 3rd day having 2 cans left (we had 8) so walls and floor got a third coat which only took me about 3 hours as no fiddly bits. It looks great and we were very pleased with the product and our efforts. No rain on it while we worked or afterwards while it cured.We gave it 6 days no rain 30 deg temp to cure, then filled it with 2 garden hoses taking a total of 16 hours over a day and a half. Thanks for your help. I am a handyman and do most jobs and had a farm so this was no big deal but a lot of time and sweat expended (we were careful to have an old towel rag around our necks to mop up sweat so it didnt fall onto wet paint, (although you said that minor water wouldnt worry it) on hot days getting it prepared. The mid blue colour shows a very slight green tinge to it when filled with water and looks like clear Barrier Reef diving areas, so turned out great. Thanks for your help on the phone when we ordered. So far very happy, and hope it lasts a long time.