Tag Archives: epoxy paint uses Sydney

Some characteristics of epotec epoxy paint Sydney

Pool paints for swimming pool waterproofing are considered superior than other kinds of waterproofing finish. However, conventional paints have been disadvantages which render them not very efficient when it comes to swimming pool waterproofing. All such disadvantages have been eliminated in epotec epoxy paint Sydney. Therefore, when we talk of waterproofing the inner walls of a swimming pool using pool paint, epotec epoxy paint ranks higher than other kinds of paints.

Suitable surfaces for application

Epotec epoxy paint for concrete Sydney successfully attaches to the concrete surface of a concrete swimming pool. Thus, it is used for waterproofing the inner walls of concrete swimming pools. Epotec coating forms a barrier over the concrete surface and prevents pool water from reaching the steel reinforcements of the concrete swimming pool and causing damage. Epotec is being widely used during concrete swimming pool construction Sydney to impart waterproofing to the inner walls of the pool. Epotec also has become the best choice of waterproofing paint at the time of concrete swimming pool repair Sydney to prevent future problems caused by water invasion.

Other surfaces for which epotec paint can be used for waterproofing are as follows.

  • Fiberglass surfaces
  • Rendered finish
  • Pebblecrete finish
  • Marblesheen finish
  • Painted surfaces.

Thus, eptoec is not only a concrete swimming pool coating Sydney but is also used for waterproofing many other types of swimming pools. However, proper surface preparation is necessary to get the best waterproofing epoxy paint uses Sydney.

Time period before the need for recoating

Epotec epoxy paint does not wear away easily. Epotec does not shrink, peel or chip unlike conventional paints. It maintains the thickness at which it is applied. The coating is also not affected by chemicals present in the pool because it is inert nor it is affected by the UV rays of the sun. All these factors make epotec a long lasting pool paint. In case of domestic swimming pools, epotec coating can usually last for 12 years while in case of commercial swimming pools, a minimum of 5 years is the time period for which the paint coating lasts before the need for recoating.

Waterproof coating by non pool grade epoxy paints can only last 2-3 years while chlorinated rubber paint can last just 1-2 years. Epotec has been designed for swimming pools and is the best epoxy paint for swimming pool waterproofing.

Maintaining epotec paint

Epotec paint coating has a very smooth surface and is a high built coating. Thus, it does not attract dust particles and prevents the growth of algae. The coating can be simply cleaned with a broom occasionally. Detergent and pad can be used to remove stains. If an area of the inner walls of the swimming pool gets damaged then it is likely that the integrity of the epotec coating has also suffered damage and is no longer offering protection to the concrete surface against pool water. In such cases, the damaged area needs to be repaired immediately.

 

 

Epotec can be easily ordered by getting a price quote after mentioning all the information about the swimming pool such as dimensions followed by payment using credit card, cheque or direct payment.

The various epoxy paint uses and other information

Epoxy paints have gained a lot of popularity for giving perfect finish to swimming pools in the past few years because of many advantages it enjoys over tiles and rendered type finishes. Tiles, for example, can develop leaks which are very difficult to repair. The joints between the tiles are also very difficult to clean. Replacement of damaged or worn out tiles is also a daunting task. Rendered type finishes have rough surfaces which can cause scratches and other injuries. Epoxy paint coatings do not suffer from any of the above mentioned handicaps. For example, Epotec pool paint available with specialist epoxy paint suppliers does not need recoating for about 7-14 years and provides a very smooth and seamless surface.

The various features of Epotec epoxy paint coating have been listed here.

Uses

The primary use of epoxy paint is to protect the swimming pool structure by acting as a waterproof barrier against the pool water. The epoxy paint uses with regards to various types of swimming pools are as follows.

  • Epotec epoxy paint for concrete protects the steel reinforcements of a concrete swimming pool against water by making the concrete impermeable to water in both liquid as well as gaseous forms. It forms a coating on the inner surfaces of the pool.

 

  • Epotec epoxy paint for fiberglass takes over the function of a worn out or damaged gel coat present in a fiberglass swimming pool. The function is to prevent the pool water from damaging the fiberglass shell of the pool.

 

  • Epotec epoxy paint can be used for both marblesheen and pebblecreet finished concrete swimming pools besides fiberglass lined concrete swimming pools.

Characteristics

Epotec epoxy coating does not have solvents or thinners which makes it a fully solid coating. This means that the coating retains the same thickness and does not undergo shrinkage. Even though the paint has no thinner, it has been created specifically to be easily applied using a brush or roller.  The epoxy coating does not react with chemicals which implies that it cannot be removed using chemical solutions.

It is necessary to apply a thick coating of the paint because thickness of the coating determines its life span. Epotec gives a standard thickness of 320 microns which is much more than other types of epoxy paints.

2-pack epoxy paint

Epotec pack features two tins with one tin containing 2.5 kg of resin and the other tin containing 0.5 kg of hardener. The hardener needs to be added to the tin containing the resin and mixed together with a plastic hand mixer. The mixing should be done slowly. The mixing process takes about 2-3 minutes. The mixture must be left undisturbed for about ten minutes.

Cleaning

The epotec epoxy paint can be easily cleaned using a simple broom because it is resistant against dirt and fugal growth. The surface can also be scrubbed using a detergent to eliminate occasional stains which may appear on it.

Long lasting

Epotec does not peel off or flake as is the case with other paints. It also does not wear down easily. The coating can last between 7 and 14 years.

 

 

Professional workmen are available for applying Epotech epoxy paint on the swimming pools. You can also do it all by yourself but the right technique is indispensable.

Some facts about epoxy paint for concrete and other swimming pools

Epoxy paint coatings for swimming pools are tailor made for water. The pool grade epoxy paints can remain immersed in water without any change in their properties. They are also highly resistant against UV rays of the sun and chemicals usually present in the pool water such as chlorine. The strength of epoxy paint coating is directly proportional to the thickness of the coating. The coating usually lasts 7 to 14 years. Epotec is one such high-grade pool paint coating available with only specialist epoxy paint suppliers.

What is it used for?

Epotec epoxy paint uses for swimming pools can be summarized under the following subheadings.

Concrete swimming pools

Epotec epoxy paint for concrete swimming pools prevents the passage of water through the concrete in both liquid as well as vapour form. It prevents the creation hydrostatic water pressure which causes water to move through the concrete. The easy passage of water vapour through the concrete commonly found in areas with high water tables is also prevented by the use of epoxy pool paint for concrete swimming pools. Concrete swimming pools with different types of finishes such as pebblecrete or marblesheen concrete swimming pools can also be upgraded with epoxy paint coating. Fiberglass lined concrete swimming pools can also be upgraded with epoxy coating.

Fiberglass swimming pools

Epotec epoxy paint for fiberglass swimming pools replace damaged and worn out gel coats found in fiberglass swimming pools. Damaged gel coats show many signs such as black spots, holes through which water seeps inside the underlying structures, osmosis damage, etc. It is necessary to repair the gel coat and eliminate other problems such as osmosis and algae growth prior to resurfacing the pool with epotec epoxy paint. The pool needs to emptied before carrying out the repairs. Un-reacted styrene present on the surface of fiberglass swimming pools also need to be removed before applying epoxy paint because it disrupts the long term bondage of the coating with the surface. Badly damaged fiberglass swimming pool needs to be replaced with a new one. The surface of the new fiberglass swimming pool can be coated with epoxy paint to prevent future problems.

Repair

Epoxy filler can be used to repair holes in both concrete as well as fiberglass swimming pools. The 2-pack epoxy filler needs to be mixed in equal proportions using a knife. The filler mixture must then be filled inside the hole with the same knife. It is better to overfill the hole. A mixture of detergent and water must then be spread over the surface using your fingers. This is necessary to get a smooth surface. Epotec must be applied after the curing process is complete. This usually takes about a day. The rough spots can be eliminated by sanding after the mixture has cured.

 

 

Colours

Epotec epoxy pool painting is available in a number of colours such as black, dark blue, slate grey, white, opal, glacier white, light blue and much more.

 

 

Epotec epoxy coating easily adheres to a damp surface and requires 5-7 days for curing. It provides a strong coating with a smooth surface. The lifespan of the coating is usually 7-14 years.