Tag Archives: epoxy paint Sydney

Some characteristics of epotec epoxy paint Sydney

Pool paints for swimming pool waterproofing are considered superior than other kinds of waterproofing finish. However, conventional paints have been disadvantages which render them not very efficient when it comes to swimming pool waterproofing. All such disadvantages have been eliminated in epotec epoxy paint Sydney. Therefore, when we talk of waterproofing the inner walls of a swimming pool using pool paint, epotec epoxy paint ranks higher than other kinds of paints.

Suitable surfaces for application

Epotec epoxy paint for concrete Sydney successfully attaches to the concrete surface of a concrete swimming pool. Thus, it is used for waterproofing the inner walls of concrete swimming pools. Epotec coating forms a barrier over the concrete surface and prevents pool water from reaching the steel reinforcements of the concrete swimming pool and causing damage. Epotec is being widely used during concrete swimming pool construction Sydney to impart waterproofing to the inner walls of the pool. Epotec also has become the best choice of waterproofing paint at the time of concrete swimming pool repair Sydney to prevent future problems caused by water invasion.

Other surfaces for which epotec paint can be used for waterproofing are as follows.

  • Fiberglass surfaces
  • Rendered finish
  • Pebblecrete finish
  • Marblesheen finish
  • Painted surfaces.

Thus, eptoec is not only a concrete swimming pool coating Sydney but is also used for waterproofing many other types of swimming pools. However, proper surface preparation is necessary to get the best waterproofing epoxy paint uses Sydney.

Time period before the need for recoating

Epotec epoxy paint does not wear away easily. Epotec does not shrink, peel or chip unlike conventional paints. It maintains the thickness at which it is applied. The coating is also not affected by chemicals present in the pool because it is inert nor it is affected by the UV rays of the sun. All these factors make epotec a long lasting pool paint. In case of domestic swimming pools, epotec coating can usually last for 12 years while in case of commercial swimming pools, a minimum of 5 years is the time period for which the paint coating lasts before the need for recoating.

Waterproof coating by non pool grade epoxy paints can only last 2-3 years while chlorinated rubber paint can last just 1-2 years. Epotec has been designed for swimming pools and is the best epoxy paint for swimming pool waterproofing.

Maintaining epotec paint

Epotec paint coating has a very smooth surface and is a high built coating. Thus, it does not attract dust particles and prevents the growth of algae. The coating can be simply cleaned with a broom occasionally. Detergent and pad can be used to remove stains. If an area of the inner walls of the swimming pool gets damaged then it is likely that the integrity of the epotec coating has also suffered damage and is no longer offering protection to the concrete surface against pool water. In such cases, the damaged area needs to be repaired immediately.

 

 

Epotec can be easily ordered by getting a price quote after mentioning all the information about the swimming pool such as dimensions followed by payment using credit card, cheque or direct payment.

Useful information about epotec epoxy paint Sydney

Epotec is a pool waterproofing paint which is widely used in Olympic pools, residential pools, commercial pools, community pools, thermal pools and spas. This is an epoxy paint Sydney which has proved its worth in waterproofing the inner walls of concrete swimming pools, fiberglass swimming pools and other kinds of swimming pools. The swimming pool water needs to be prevented from damaging the structure of the pool and the epotec pool paint fulfills this function by providing efficient waterproofing. Swimming pool water is usually loaded with chemicals for purification but the epotec paint remains unaffected by such chemicals. Epotec is a high build coating which comes in the form of a resin and a hardener. When the two are mixed, a chemical reaction ensues which forms a high strength coating.

Why it is used?

The main epoxy paint uses Sydney is waterproofing. Let us take the example of a concrete swimming pool. A concrete swimming pool has steel reinforcements in its structure which is necessary for its overall stability. If the pool water is soaked by the surface of the inner walls of the swimming pool, it reaches the steel reinforcements. Exposure to water causes the steel reinforcements to corrode and collapse leading to costly repairs. Epotec epoxy paint for concrete Sydney is applied over the surface of the inner walls of a concrete swimming pool. This concrete swimming pool coating Sydney forms an impediment to the passage of water through the concrete surface. Consequently, the steel reinforcements are protected against water damage at all times. Epotec paint does not detach from the concrete surface unlike tiles, has a smooth surface unlike rendered finish and can last for 7-14 years. These advantages are the reasons why people are using epotec for waterproofing after new concrete swimming pool construction Sydney.

Another example is fiberglass lined concrete swimming pool. Epotec can be used during fiberglass lined concrete swimming pool repair Sydney. Repairs are required when the fiberglass lining either becomes detached from the concrete surface of the swimming pool or is damaged or worn out.

What colours are available?

Epotec epoxy paint comes in a range of colours. The different kinds of colours include white, glacier white, opal, chamois, slate grey, whisper grey, black, pale glade, royal blue, dark blue, light blue, and mid blue. Apart from standard colours, epotec paint is also available in other non standard colours specifically manufactured according to the client’s requirements.

Epotec coating may acquire a yellowish tinge over a period of time. Therefore, light colour is recommended. The paint colour can be also be selected on the basis of the colour of the surroundings of the pool such as vegetations, pavers, tiles, etc. Some people want to match the colour of the pool with the surroundings while some want a contrasting colour for the pool.

Warranty

A warranty of 5 years is offered on epotec epoxy paint coating. The epotec paint lasts long and gives the best performance if the paint coating is applied properly according to guidelines and the pool water is maintained at the recommended conditions.

 

 

Thus, epotec epoxy paint can be used to replace other kinds of waterproof finishing used in swimming pools.

Epoxy concrete swimming pool coating Sydney for waterproofing

The importance of waterproofing the inner walls of swimming pools is emphasized by swimming pool experts all over the world. The advent of new technology has enabled the creation of waterproof pool paints for swimming pool waterproofing. The waterproof pool paints can be used instead of conventional waterproof finishing such as rendered finishes or tiles. Epotec epoxy paint Sydney is a superior pool paint as compared to other types of waterproof pool paints available in the market. Epotec chemically attaches to surface, withstands chemicals and UV rays of the sun, resists cracking, easy to clean, long lasting, resists staining and has a smooth surface which does not scratch the skins of the swimmers. All these characteristics and more make epotec the ideal choice for swimming pool waterproofing.

Method of application

The surface needs to be cleaned using detergent to remove dirt, oil, fats and other contaminants. Acid must not be used for cleaning the surface. Defects on the surface such as worn out areas, cracked areas, etc. must be repaired. Moisture must also be removed from the surface prior to application of epotec coating.

Roller or brush can be used for applying epotec. The area covered per application should be 1-2 square metres. The thickness of the coating determines its life span. Therefore, the coating should be sufficiently thick and every area must have the same thickness of coating to prevent uneven life span of the coating in different areas.

The application of the coatings must commence in the morning and finish by 1 pm in summers and 12 pm in winters. This is essential to enable the coating to cure before evening when dew sets in. The time required for a coat to cure is 12-24 hours. Curing time may be increased in winters. The pool can be filled with water and chemicals can be added only after 5 days from coating in summers and 7 days in winters.

The epotec coating must also be protected against rain during the curing period. If rain falls on the epotec coated surface during this period, a whitish spot appears on it. The white spot does not affect the waterproofing function of epotec or the curing process even though it spoils the aesthetics. The whitish spot disappears within 1-2 months or it can be sanded off.

Mode of waterproofing

Epotec is a waterproof concrete swimming pool coating Sydney. The hard coating forms a shield over the concrete surface of the inner walls of a concrete swimming pool. Both liquid and gaseous water molecules are prevented from reaching the steel reinforcements of the concrete swimming pool by the epotec coating. Thus, the structure of the concrete swimming pool remains intact. This is the reason why epotec should be used for waterproofing at the time of concrete swimming pool construction Sydney or concrete swimming pool repair Sydney. Epotec epoxy paint for concrete Sydney has similar actions in fiberglass lined concrete swimming pools and marblesheen and pebblecrete finished concrete swimming pools.

Waterproofing fiberglass swimming pools also come under epoxy paint uses Sydney.

 

 

Apart from functional point of view, epotec also scores well in terms of aesthetics because it is available in a range of colours and textures.

The various epoxy paint uses and other information

Epoxy paints have gained a lot of popularity for giving perfect finish to swimming pools in the past few years because of many advantages it enjoys over tiles and rendered type finishes. Tiles, for example, can develop leaks which are very difficult to repair. The joints between the tiles are also very difficult to clean. Replacement of damaged or worn out tiles is also a daunting task. Rendered type finishes have rough surfaces which can cause scratches and other injuries. Epoxy paint coatings do not suffer from any of the above mentioned handicaps. For example, Epotec pool paint available with specialist epoxy paint suppliers does not need recoating for about 7-14 years and provides a very smooth and seamless surface.

The various features of Epotec epoxy paint coating have been listed here.

Uses

The primary use of epoxy paint is to protect the swimming pool structure by acting as a waterproof barrier against the pool water. The epoxy paint uses with regards to various types of swimming pools are as follows.

  • Epotec epoxy paint for concrete protects the steel reinforcements of a concrete swimming pool against water by making the concrete impermeable to water in both liquid as well as gaseous forms. It forms a coating on the inner surfaces of the pool.

 

  • Epotec epoxy paint for fiberglass takes over the function of a worn out or damaged gel coat present in a fiberglass swimming pool. The function is to prevent the pool water from damaging the fiberglass shell of the pool.

 

  • Epotec epoxy paint can be used for both marblesheen and pebblecreet finished concrete swimming pools besides fiberglass lined concrete swimming pools.

Characteristics

Epotec epoxy coating does not have solvents or thinners which makes it a fully solid coating. This means that the coating retains the same thickness and does not undergo shrinkage. Even though the paint has no thinner, it has been created specifically to be easily applied using a brush or roller.  The epoxy coating does not react with chemicals which implies that it cannot be removed using chemical solutions.

It is necessary to apply a thick coating of the paint because thickness of the coating determines its life span. Epotec gives a standard thickness of 320 microns which is much more than other types of epoxy paints.

2-pack epoxy paint

Epotec pack features two tins with one tin containing 2.5 kg of resin and the other tin containing 0.5 kg of hardener. The hardener needs to be added to the tin containing the resin and mixed together with a plastic hand mixer. The mixing should be done slowly. The mixing process takes about 2-3 minutes. The mixture must be left undisturbed for about ten minutes.

Cleaning

The epotec epoxy paint can be easily cleaned using a simple broom because it is resistant against dirt and fugal growth. The surface can also be scrubbed using a detergent to eliminate occasional stains which may appear on it.

Long lasting

Epotec does not peel off or flake as is the case with other paints. It also does not wear down easily. The coating can last between 7 and 14 years.

 

 

Professional workmen are available for applying Epotech epoxy paint on the swimming pools. You can also do it all by yourself but the right technique is indispensable.