Tag Archives: epoxy paint for concrete Sydney

Some facts about epoxy paint for concrete and other swimming pools

Epoxy paint coatings for swimming pools are tailor made for water. The pool grade epoxy paints can remain immersed in water without any change in their properties. They are also highly resistant against UV rays of the sun and chemicals usually present in the pool water such as chlorine. The strength of epoxy paint coating is directly proportional to the thickness of the coating. The coating usually lasts 7 to 14 years. Epotec is one such high-grade pool paint coating available with only specialist epoxy paint suppliers.

What is it used for?

Epotec epoxy paint uses for swimming pools can be summarized under the following subheadings.

Concrete swimming pools

Epotec epoxy paint for concrete swimming pools prevents the passage of water through the concrete in both liquid as well as vapour form. It prevents the creation hydrostatic water pressure which causes water to move through the concrete. The easy passage of water vapour through the concrete commonly found in areas with high water tables is also prevented by the use of epoxy pool paint for concrete swimming pools. Concrete swimming pools with different types of finishes such as pebblecrete or marblesheen concrete swimming pools can also be upgraded with epoxy paint coating. Fiberglass lined concrete swimming pools can also be upgraded with epoxy coating.

Fiberglass swimming pools

Epotec epoxy paint for fiberglass swimming pools replace damaged and worn out gel coats found in fiberglass swimming pools. Damaged gel coats show many signs such as black spots, holes through which water seeps inside the underlying structures, osmosis damage, etc. It is necessary to repair the gel coat and eliminate other problems such as osmosis and algae growth prior to resurfacing the pool with epotec epoxy paint. The pool needs to emptied before carrying out the repairs. Un-reacted styrene present on the surface of fiberglass swimming pools also need to be removed before applying epoxy paint because it disrupts the long term bondage of the coating with the surface. Badly damaged fiberglass swimming pool needs to be replaced with a new one. The surface of the new fiberglass swimming pool can be coated with epoxy paint to prevent future problems.

Repair

Epoxy filler can be used to repair holes in both concrete as well as fiberglass swimming pools. The 2-pack epoxy filler needs to be mixed in equal proportions using a knife. The filler mixture must then be filled inside the hole with the same knife. It is better to overfill the hole. A mixture of detergent and water must then be spread over the surface using your fingers. This is necessary to get a smooth surface. Epotec must be applied after the curing process is complete. This usually takes about a day. The rough spots can be eliminated by sanding after the mixture has cured.

 

 

Colours

Epotec epoxy pool painting is available in a number of colours such as black, dark blue, slate grey, white, opal, glacier white, light blue and much more.

 

 

Epotec epoxy coating easily adheres to a damp surface and requires 5-7 days for curing. It provides a strong coating with a smooth surface. The lifespan of the coating is usually 7-14 years.

Facts about application of epotec pool paint

Epoxy coatings are more commonly used in swimming pools as compared to chlorinated rubber. This is due to a number of superior characteristics of the former. In fact, chlorinated rubber is not much in use because it is hard to use, has a high solvent content and does not perform very well. The epoxy paints are known for their high durability and impressive protection of the swimming pool structure against water and chemicals.

The epotec pool paint is a high grade epoxy paint which provides more coat thickness than other brands of epoxy paints. This is a 2 part epoxy coating which protects the pool against general wear and tear apart from water and chemical damage.

How is it applied?

Epotec pool paint is commonly applied with the help of rollers. The thickness of the paint determines its longevity and a good finish is obtained with the usage of rollers. It can also be spray painted though it is not recommended. The application can be done without the help of professionals. However, proper cleaning of the surface is very important prior to its application.

Effect of rain

The epotec epoxy pool paint Perth requires about 5-6 hours for curing after application. If it rains during this time period, the curing process would neither get affected adversely nor would there be any issue with the performance of the coat. However, a whitish mark would appear on the surface. This whitish mark is not aesthetically appealing and can be sanded off even though the mark is transient and disappears after 1-2 months.

Recoating

The epotec pool paint lasts for 7-14 years. There may be an appearance of worn out areas after this time period. This is especially true for areas under use such as staircase. The simple course of action in such cases is to clean the area, spread light sand on the surface and finally apply one or two coats of epotec. Recoating is easy and cheap as well.

Swimming pool repairs

Epotec paint can be used to upgrade the swimming pool at the time of repairs such as fiberglass pool repairs. Fiberglass swimming pools may require repairs after about 10 years due to osmosis damage, algae growth, black spots, wear and tear of the pool structure, worn out gel coat and much more. Applying a thick coat of epotec paint at the end of the repair works makes the gel coat resistant against the elements and wear and tear due to the presence of a hard coat specially designed for use in pools. It is necessary to complete the repairs and prepare the surface before applying epotec. Apart from fiberglass, epotec can also be used for a number of concrete pools.

Mixing

Epotec consists of a resin in a can along with a hardener in another can. The entire hardener needs to be put in the resin can and mixed thoroughly using a plastic hand mixer. The mixing can be stopped after 2-3 minutes after a uniform colour is obtained. The mixture must then be allowed to stand for 10 minutes.

By following these steps, the application of epotec paint would certainly look perfect in every manner.