Tag Archives: epoxy paint colours

Get hard waterproof coating with epoxy pool paint

Waterproof finishing for the inner walls of a swimming pool should be highly effective against water invasion, highly smooth, durable, easy to maintain and aesthetically appealing. All such qualities are present in Epotec epoxy pool paint. Epotec epoxy paint has been tailor-made for swimming pool water and is much superior than rendered finish, tiles and other kinds of waterproof finish for swimming pools. Epotec is not a general grade epoxy paint used for painting concrete floors, steel works, etc. General grade epoxy cannot paint disintegrates in water and cannot be used for waterproofing swimming pools. Only a pool grade epoxy paint can be immersed in water and epotec is one such pool grade epoxy paint.

Advantages of over other types of finishing

Epotec has several advantages over rendered and other kinds of waterproof finishing. Some of them have been listed here.

  • Epotec is able to withstand all kinds of chemicals present in the pool water without reacting with them. It is also resistant against UV rays of the sun. This is not the case with other kinds of finishing.

 

  • Epotec chemically attaches to the surface and there is no chance of the coating getting detached from the walls.

 

  • Epotec does not stain due to rust, leaves, minerals or some other causes.

 

  • Epotec does not crack easily and cannot be removed by cleaning agents.

 

  • Epotec has a very smooth surface and is simple to clean using detergents and brooms or brushes.

 

  • Epotec can be easily recoated.

 

  • Epotec coating lasts for 7-14 years which makes it a long lasting and economical pool paint.

 

  • Epotec epoxy paint colours are available in a number of shades.

 

  • Epotec can be easily applied by the pool owners themselves by following a simple procedure. However, skilled professionals are also available for the job.

Water protection for concrete and fiberglass swimming pools

Epotec is an ultimate concrete swimming pool coating Sydney for waterproofing. A concrete swimming pool has steel reinforcements in its shell. Water penetration of the surface of the concrete inner walls is prevented by the epotec coating. This is essential because pool water can cause concrete cancer or corrosion of the steel reinforcements which damages the shell of the swimming pool. Epotec concrete swimming pool coating Sydney is resistant against both liquid and vapour thereby providing an impregnable shield for the concrete surface against pool water.

Epotec is also a waterproof epoxy paint for fiberglass swimming pools. The fiberglass shell of a fiberglass swimming pool needs protection against water to prevent rotting of the fiberglass strands and the consequent collapse of the shell. The inner finish of the fiberglass swimming pool called gel coat fulfills the waterproofing function. However, damage to the gel coat due to algae growth, osmosis spots and other causes render it ineffective against water. In such cases, epotec coating can be applied after fiberglass pool repair to replace the gel coat.

Fiberglass lined concrete swimming pools along with pebblecrete and marble sheen swimming pools can also be upgraded with epotec.

 

 

Pool waterproofing paints are being widely preferred by people. Epotec is a much better choice than other kinds of paints such as chlorinated rubber pool paints.

Ultimate pool waterproofing with epotec epoxy pool paint

When it comes to swimming pool waterproofing, you need to implement only the best solutions. This is because imperfect waterproofing can lead to significant damage to your swimming pool resulting in highly exorbitant repair bills. In many cases, water damage can be so severe that the whole pool needs to be replaced. Waterproof pool paints are being widely used by pool owners for all kinds of pools. However, not all pool paints provide efficient waterproofing. The ultimate waterproofing paint which provides perfect and long term protection against pool water is epotec epoxy pool paint. Epotec has been designed specifically for swimming pool waterproofing and is capable of water immersion for long periods of time.

Reasons for its high potency

  1. Epotec epoxy paint remains unaffected by chemicals such as chlorine added to pool water for purification since it is chemically inert. The coating is also not affected by body lotions, body fats, dirt, etc. Therefore, short of mechanical damage, there is no way in which the coating can disintegrate in the pool.

 

  1. Epotec paint forms a high build coating. There is no shrinkage of the coating which enables it to retain its original thickness. The reason for this characteristic is the zero solvent content of the paint. Since the solvent content is zero, there is no evaporation. What we get is a 100% solid coating.

 

  1. Epotec coating can last for 7-14 years without the need for recoating. The life of the coating depends upon the thickness. More the thickness of the coating more is the life span. Thus, epotec guarantees water protection for year on end.

Types of swimming pools covered

Epotec paint can be used for waterproofing both concrete and fiberglass swimming pools along with other varieties of swimming pools.

Concrete- Epotec is a highly effective concrete swimming pool paint Sydney.  Waterproofing is crucial in a concrete swimming pool because pool water leaking through the inner walls can reach the steel reinforcements used in the pool resulting in damage. Epotec concrete swimming pool coating Sydney protects the steel reinforcements against water by forming a strong barrier over the concrete surface. This barrier cannot be penetrated by pool water. Epotec also provides protection against hydrostatic pressure which develops when water is directly in contact with concrete.

Fiberglass- Fiberglass strands making up the structure of a fiberglass swimming pool starts to rot when pool water starts reaching them. This can happen when the inner finish of the pool called gel coat is damaged or worn out. Epotec epoxy paint for fiberglass can be used as a waterproof finish in such cases instead of gel coat. Upgrading of the gel coat with epotec can be done only after the completion of fiberglass pool repair. Proper repairs to the gel coat such as elimination of algae growth and osmosis spots must be undertaken before resurfacing with epotec.

Wide range of colours

Epotec epoxy paint colours come in a plethora of shades. Some of them are as follows.

  • Blue( Sky blue, Dark blue, Mid blue and Royal blue)
  • Grey( Whisper and Slate grey)
  • Aqua
  • Black
  • Opal

 

 

 

Epotec paint is a blend of superior waterproofing function, high durability and good aesthetics. Thus, it is the ideal paint for swimming pools.

Features of epotec epoxy pool paint designed for swimming pools

Tiles and rendered finish used for swimming pool waterproofing have many disadvantages. Broken tiles are difficult to replace and leakages appearing in tiles also cannot be plugged easily. It is also difficult to clean and maintain tiled finishing. Rendered finish has a rough surface and can scratch the skins of swimmers. Thus, in order to get the best waterproofing without any of the associated disadvantages, epotec epoxy pool paint is being widely used by people. Epotec paint coating provides a hard wearing but smooth surface which does not scratch the skin. It is also very easy to clean and highly durable. The paint comes in various colours and is aesthetically appealing.

Epotec for concrete swimming pools

Epotec paint is an efficient and convenient waterproofing option for concrete swimming pools. Concrete swimming pools feature steel reinforcements in their structures. In the absence of waterproofing, the inner walls of the swimming pool allow water to penetrate their concrete surface and reach the steel reinforcements. Consequently, the steel reinforcements get corroded leading to collapse of the structure of the swimming pool. Epotec concrete swimming pool coating Sydney prevents water from coming in contact with the concrete mass and invading the steel reinforcements. Epotec concrete swimming pool paint Sydney is both water and vapour proof meaning it withstands both liquid and gaseous water molecules.

Concrete swimming pools with marblesheen and pebblecrete finishing can also be waterproofed using epotec paint. Marblesheen is made using crushed marble chips and white cement while peeblecrete is a mixture of pebbles and cement. Epotec is useful when these finishings are no longer able to provide waterproofing either due to damage or general wear and tear.

Damaged or worn out fiberglass lining in fiberglass lined concrete swimming pools can also be replaced with epotec pool paint for waterproofing.

Epotec for fiberglass swimming pools

Fiberglass swimming pools are widely used in both domestic households as well as commercial establishments. Fiberglass swimming pools are made using fiberglass strands and resin. The shell of a fiberglass swimming pool is a semi transparent structure. The inner surface of the pool has a finish called gel coat. Gel coat is visible underneath the pool and its function is to prevent pool water from reaching the fiberglass shell of the pool. Epotec epoxy paint for fiberglass can be used to upgrade the waterproofing ability of the pool when the gel coat wears out or suffers damage. Osmosis spots, algae growth, black spots and general wear and tear compromise the waterproofing function of the gel coat. Upgrading with epotec prevents water from getting into the fiberglass structure of the pool and causing damage.

However, before resurfacing with epotec, it is necessary to go for fiberglass pool repair. The gel coat must be repaired before applying epotec. The pool may also require other kinds of repairs as determined by the fiberglass pool contractor.

Colours available

There are many epotec epoxy paint colours for the customers to choose from for their pools. The various colours include chamois, pale gade, gardenia, glacier white, slate grey, etc.

 

 

 

Epotec pool paint is a simple yet effective way of pool waterproofing and avoiding costly repairs necessitated by water damage.

Beneficial features of epotec and other details

Simply constructing a swimming pool for domestic or commercial use is not enough because maintenance is equally important. A swimming pool has many associated maintenance issues one of which is waterproofing. However, there is now no need for elaborate measures for swimming pool waterproofing due to the advent of epotec epoxy pool paint. This is a pool paint which forms a hard surface coating over the inner walls of swimming pools and provides long term waterproofing.

Advantages

There are many advantages of using epotec pool paint for waterproofing.

  1. High waterproofing action- Epotec paint is the ultimate waterproofing solution for concrete swimming pool construction Sydney. This is because epotec chemically attaches to the concrete and forms an impermeable shield over the inner walls. This prevents water in either liquid or vapour form from moving through the concrete and invading the steel reinforcements of the concrete swimming pool structure. Epotec can also be incorporated at the time of concrete swimming pool repairs Sydney. In case of fiberglass swimming pools, epoxy paint for fiberglass Sydney is used to upgrade the gel coat. Gel coat is the finish of the inner surfaces of a fiberglass swimming pool which prevents pool water from reaching the outer fiberglass shell of the swimming pool. Epotec coating is required when the gel coat is damaged or worn out. Apart from concrete and fiberglass swimming pools, epotec can also be used for waterproofing damaged fiberglass lined concrete swimming pools and swimming pools with marblecrete or pebblesheen finishing.

 

  1. Solid coating- Epotec epoxy paint coating does not shrink and preserves the applied thickness even after curing. This happens because of the absence of thinners and solvents in this pool paint. A 100% solid chemical composition ensures that there is no liquid to evaporate during curing which retains the applied thickness. That is why applying a thick coat of paint is important to get a high-strength coating.

 

  1. Long lasting- Epotec paint coating lasts for about 14 years when applied properly and in specified thickness.

 

  1. Extensive colour range- Epotec epoxy paint colours Sydney are available in a plethora of shades suited for different pool types. The various available colours are sky blue, royal blue, slate grey, opal, chamois, glacier white and much more. Thus, there are many options before the pool owners.

 

Effect of rain on epotec

Epotec coating takes about 5-6 hours for curing. If it rains during this period, the paint acquires a whitish appearance. The curing process is not affected nor is the waterproofing function of the coating compromised. Only the aesthetics is spoiled. The whitish spot disappears within 1-2 months. One can also remove it by sanding and recoating.

Use of epoxy filler

Epoxy filler can be used to repair holes in concrete and fiberglass swimming pools prior to applying epotec paint. Epoxy filler comes in two packs. You need to mix equal proportions of filler from both the pack on a board till a homogenous colour is obtained. This mixture must then be filled in the holes using a knife. The surface is made smooth by using fingers dipped in water and dishwashing detergent. The filler must be allowed to cure for 24 hours.

Cost

Free price quote is available from specialist epoxy paint suppliers Sydney. The cost depends upon the amount of epotec paint required.

 

 

Epotec scores more than other kinds of epoxy paints because of the many beneficial features as mentioned before.

All about epotec pool paint for swimming pool waterproofing

Inner walls of a swimming pool should be coated with an agent which not only provides long term waterproofing, but also withstands all types of chemicals commonly added in swimming pool water. Furthermore, the waterproofing agent must also have a smooth surface and should be easy to clean. All these characteristics and more are found in epotec pool paint. This is a pool grade epoxy pool paint which has been specifically manufactured to remain immersed in water without breaking up. Epotec expoxy pool paint is available with specialist epoxy paint suppliers Sydney. Epotec is long lasting and its performance is closely related to the correct method of application.

Functions

Epotec firmly attaches chemically with the concrete surface to provide waterproofing. This is crucial in concrete swimming pools since pool water cannot be allowed to reach the steel reinforcements used in the structure of a concrete swimming pool. Thus, epotec epoxy is suitable for waterproofing the inner walls during concrete swimming pool repairs Sydney. A thick coating of the paint ensures that the steel reinforcements remain protected from water at all times thereby eliminating any risk of structural collapse.

Waterproofing action of epotec can also be utilized in fiberglass swimming pools. The gel coat of a fiberglass swimming pool is the finishing on the inner surface. The gel coat can start wearing out with time as evidenced by the appearance of brown areas and black spots. Algae growth and osmosis can also damage the gel coat. As a result, water starts getting absorbed through the gel coat into the underlying structure of the pool causing damage to the fiberglass layers. This condition can be reversed by replacing the gel coat with epoxy paint for fiberglass Sydney. Re-fiberglassing and other kinds of repairs such as gel coat repairs, osmosis repairs, pool bracing and resurfacing may be carried out before applying epotec paint.

Epotec also protects the concrete against hydrostatic water pressure. Hydrostatic pressure is created when concrete comes in direct contact with liquid. Hydrostatic pressure causes the liquid or gas molecules to move through the concrete. This is especially true in case of concretes with imperfections such as cracks, honeycombs, etc. Epotec keeps water away from the concrete mass and prevents the development of hydrostatic pressure.

Thickness

Greater the applied thickness of the epotec paint more is the strength of the coating. Since there are no solvents in epotec pool paint the thickness of the cured coating is same as the applied thickness. The normal dry film thickness of epotec is 320 microns when applied using the correct methods.

Colour range

The colour of the swimming pool should either contrast or match the colour of the surroundings such as vegetation, tiles, etc. Dark colours warm the water. There are many types of epotec epoxy paint colours Sydney such as various shades of blue, black, chamois, slate grey, white and others. Since epotec tends to get yellowed with time, it is better to opt for lighter shades.

 

 

Epotec has many superior characteristics which makes it better than other kinds of epoxies available in the market.