Once Epotec has been mixed and applied correctly it will cure enough in about 5 – 6 hours, providing the surface temperature remains about 15 – 20 C. If the temperature of the surface drops below 13 C, the curing may stop until the temperature increases again.

During this curing time, rain and condensation needs to be kept off. If it gets wet within this time frame, a whitish bloom may form on the surface. This may be aesthetically unacceptable especially on the last coat, though it will not affect the curing or performance of the Epotec. It may be left and will usually disappear after 1 – 3 months of usage. Otherwise it may be sanded off and re coated.

A “white blooming” in the last coat, which disappeared after several months of pool usage.

Print Friendly, PDF & Email
If you would like to purchase our product on line:

In the Swim - Newsletters

EPOTEC Supplied by:
Hitchins Technologies P/L,
ABN 17 119 448 501,
PO Box 3186, Bonnells Bay,NSW 2264 ,
Ph: 1300 88 79 20
All Transactions will be processed by  HITCHINS TECHNOLOGIES PTY LTD