To gain a non slip finish, particularity on ramps and steps, apply washed and graded beach sand into a wet first coat to obliterate the underlying Epotec colour. Allow to cure over night, sweep off loose material and apply a second coat to secure the sand and smooth off the surfaces somewhat.

Use a sieve or container to shake out the sand. Don’t try to make a lessor more uniform coverage. Total blinding is needed.

By total coverage (blinding) of sand a more uniform non slip will be achieved. Allow to cure overnight.

Next day, sweep off all loose sand.

Apply by roller or brush an ample coat of Epotec to reduce the profile to something comfortable to walk on.

Vacuum up loose sand. Then apply one more coat.

          Non slip finish on a ramp.

Print Friendly, PDF & Email
If you would like to purchase our product on line:

In the Swim - Newsletters

EPOTEC Supplied by:
Hitchins Technologies P/L,
ABN 17 119 448 501,
PO Box 3186, Bonnells Bay,NSW 2264 ,
Ph: 1300 88 79 20
All Transactions will be processed by  HITCHINS TECHNOLOGIES PTY LTD